SELECT CABLE LENGTH IN PULLDOWN MENU ABOVE
High Quality CNC RS-232 Cables – All Major Brands (and many
obscure ones as well)
We make communication cables for all of the major CNC mills
and lathe brands. If you are unsure about your machine, just ask
us. If your machine is not in the list
below we can also make a custom cable for you at little to no extra charge (depends
on the wiring diagram).
Our cable designs work with nearly all CNC brands that are
using DNC software handshake settings such as xON/xOFF (DC1/DC3) and RTS/CTS.
We can accommodate the following machines with our cable:
Type the NAME of the machine
control you have in the comment section. (Example: Fanuc 18M, OKUMA OSP 5000, etc
We have many custom diagrams where/when it comes time to
make a custom cable for your control.
Here’s a partial list of machines we support.
- ACRAMATIC
- AMADA
- BOSCH, BOSS
- DYNAPATH (Needs customized design - call or email for this one)
- ENSHU
- FADAL (Fadal requires a female connector on 25
Pin end - just ask or let us know if you need this)
- FAGOR
- FANUC (contact us for 1995 and older machines - they're different)
- HAAS
- HEIDENHAIN
- HINUMERIK
- HITACHI / HITACHI-SEIKI
- MAZAK
- MITSUBISHI
- MORI-SEIKI
- OKUMA
- SINUMERIK
- TRAUB
- YASNAC
- And many
more machines such as wood routers, water jets, and plasma cutters, etc. Just
call if your machine brand is not on the list.
If you have a pre-1995 CNC machine it is quite
possible that you’ll need a custom cable.
For Fanuc controls please tell use what version it is (example: Fanuc 6T or Fanuc 18M. Note that if you
need this for a FANUC 3T, 0T, 6T or 15 or a Dynapath Delta model, we will need
to customize for sure, as those usually require a slightly custom cable. We
can make custom cables, but please call or email us prior to ordering to get
confirmation that we can do this. Many
machine owners have the cable pinout diagram in the manual and you can also
send us this to ensure the cable is what your machine needs.
About Our Cables:
- Heavy Duty METAL Connector
Housings (NOT cheap plastic with chrome paint like many sell)
- High quality Copper wire
cable and connectors.
- Custom assembled with quality
parts here in the USA.
- Lightweight construction
ideal for long distance runs with no loss of data.
- All cables have built in
strain relief to ensure long life.
- Whether you need a cable that
is 5 FT or 100 FT, these are the perfect solution.
The cable we ship you will have a 9 PIN FEMALE on
one end and a 25 PIN MALE on the other end.
If you need different ends (or internal connections on
either end, just ask and we'll get you a quote
on the difference. It won't be much more if any to do that.
We sell 5 FT through 100 FT cables.
The Max cable length is 150 FT. Contact us for a quote if you need
something over 100 FT long.